(See also Apple's early 2009 Apple AirPort Networks manual for more information. Given my problems with a modern but non-Apple base station and an older AirPort Express, I assume a wireless-to-wired bridge needs Apple's WDS capabilities (and hence when reading question 2, I assume one should take question 1 into account as well). All units well inside range of each other. The AEs are both the newest edition, the tall model. Apart from 5GHz, nothing changed from default settings. Question: Can AirPort Express act as a bridge?Īnswer: AirPort Express can act as a bridge in three different ways If it is set up as a WDS remote or relay station, it can bridge the wireless network to wired clients. AirPort Extreme (7.7.9) Internet: 'dhcp', Wireless: ' extend wireless network '/ 5GHz with separate name, Network: 'off (bridge mode)'. But it can wirelessly extend the range of a WDS network that is being hosted by an AirPort Extreme Base Station or another AirPort Express. Here is how to set up bridge mode on the Apple Airport Express Here are the steps for how to set your. Have tested the AirPort Express connected to the AirPort Extreme using a wired Ethernet connection and also tested using wireless only. AirPort Express in bridge mode without any issues. Question: Can AirPort Express wirelessly extend ("repeat" or "rebroadcast") the network of a third-party access point?Īnswer: No. Been running an AirPort Exteme with new version of the AirPort Express for the past day with no issues at all regarding the extension of the Guest Network feature introduced in firmware 7.6.3. According to Apple's AirPort Express frequently asked questions: (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)Įarlier versions seem to support this kind of bridging as well, but your mileage may vary when not using an Apple base station (so, I don't expect problems for your situation). The feature should work with any wireless network: a, b, g, or n and 5GHz or 2.4GHz. To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting both settings are located in the Wireless tab of AirPort Utility. Unfortunately, this feature isn’t documented and doesn’t appear by name anywhere in AirPort Utility. In this mode, the Express acts as a wireless-to-Ethernet bridge, extending your wireless network to wired clients. The Express is also the first AirPort Base Station to provide a new feature called ProxySTA. For the March 2008 802.11n version Macworld writes (emphasis mine): Recent versions indeed support it, but early versions might not.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |